-
Solenoid Valve (Three Ports, Two Positions)
-
Direct Acting Sequence Valves
-
Relief Valve-Cartridge Type
-
Direct Acting Relief Valves Pressure relief valve, d...
-
Double Pilot Operated Check Valves
-
Shuttle Valve
-
Double Pilot Operated Check Valves Flangeable
-
Double Pilot Operated Check Valves – Type A
-
Modular One Way Flow Control Valve
-
High Pressure 3 Ways Diverter Valves, Steel Body
-
6 Ways Diverter Valves, Steel Body
-
End of Stroke Valve with Cam, Normally Closed
-
Push-Button End Stroke Valves, Normally Closed
-
2 Ways Steel Flow Divider
-
Single in Line Counterbalance Valve
-
Single Flanged Counterbalance Valve
-
SINGLE OVERCENTRE VALVES FIXING BY SCREW
-
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER
-
Solenoid Valve (Three Ports, Two Positions)
-
Direct Acting Sequence Valves
-
Relief Valve-Cartridge Type
-
Direct Acting Relief Valves Pressure relief valve, d...
-
Double Pilot Operated Check Valves
-
Shuttle Valve
-
Double Pilot Operated Check Valves Flangeable
-
Double Pilot Operated Check Valves – Type A
-
Modular One Way Flow Control Valve
-
High Pressure 3 Ways Diverter Valves, Steel Body
-
6 Ways Diverter Valves, Steel Body
-
End of Stroke Valve with Cam, Normally Closed
-
Push-Button End Stroke Valves, Normally Closed
-
2 Ways Steel Flow Divider
-
Single in Line Counterbalance Valve
-
Single Flanged Counterbalance Valve
-
SINGLE OVERCENTRE VALVES FIXING BY SCREW
-
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER
Single in Line Counterbalance Valve
The 5160B single overcenter valves of the series are designed to ensure the stability in the working position of a hydraulic actuator with suspended load, and to control its movement in only one direction (usual...
Dual compensated flanged counterbalance valve
Valve used to control the movement and locking of the actuator in both directions by realising the controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator. It is insensitive to back pressur...
Dual in line compensated counterbalance valve
Valve used to control the movement and locking of the actuator in both directions by realising the controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator. It is insensitive to back pressur...
DOUBLE OVERCENTRE VALVES FOR CLOSED CENTRE
These valves are used to control the actuator movements and block it in both directions. In order to have the descent of a load under control and avoid the load’s weight being carried away the valve will prevent any cavitation of the actuator. These valves are ideal when...
