-
Solenoid Valve (Three Ports, Two Positions)
-
Direct Acting Sequence Valves
-
Relief Valve-Cartridge Type
-
Direct Acting Relief Valves Pressure relief valve, d...
-
Double Pilot Operated Check Valves
-
Shuttle Valve
-
Double Pilot Operated Check Valves Flangeable
-
Double Pilot Operated Check Valves – Type A
-
Modular One Way Flow Control Valve
-
High Pressure 3 Ways Diverter Valves, Steel Body
-
6 Ways Diverter Valves, Steel Body
-
End of Stroke Valve with Cam, Normally Closed
-
Push-Button End Stroke Valves, Normally Closed
-
2 Ways Steel Flow Divider
-
Single in Line Counterbalance Valve
-
Single Flanged Counterbalance Valve
-
SINGLE OVERCENTRE VALVES FIXING BY SCREW
-
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER
-
Solenoid Valve (Three Ports, Two Positions)
-
Direct Acting Sequence Valves
-
Relief Valve-Cartridge Type
-
Direct Acting Relief Valves Pressure relief valve, d...
-
Double Pilot Operated Check Valves
-
Shuttle Valve
-
Double Pilot Operated Check Valves Flangeable
-
Double Pilot Operated Check Valves – Type A
-
Modular One Way Flow Control Valve
-
High Pressure 3 Ways Diverter Valves, Steel Body
-
6 Ways Diverter Valves, Steel Body
-
End of Stroke Valve with Cam, Normally Closed
-
Push-Button End Stroke Valves, Normally Closed
-
2 Ways Steel Flow Divider
-
Single in Line Counterbalance Valve
-
Single Flanged Counterbalance Valve
-
SINGLE OVERCENTRE VALVES FIXING BY SCREW
-
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER
Single in Line Counterbalance Valve
The 5160B single overcenter valves of the series are designed to ensure the stability in the working position of a hydraulic actuator with suspended load, and to control its movement in only one direction (usual...
Single Flanged Counterbalance Valve
The single overcenter valves of the series are designed to ensure the stability in the working position of a hydraulic actuator with suspended load, and to control its movement in only one direction (usually the descent phase), leaving the opposite side powered by free...
SINGLE OVERCENTRE VALVES FIXING BY SCREW
The single overcenter valves of the series are designed to ensure the stability in the working position of a hydraulic actuator with suspended load, and to control its movement in only one direction (usually the descent phase), leaving the opposite side powered by free ...
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER
double check valves it is possible to manage the support and movement of a suspended load in both directions of actuation. The typical use for this type of valve is in the presence of double-acting cylinders that you want to lock in the working or resting position. The h...
Dual compensated flanged counterbalance valve
Valve used to control the movement and locking of the actuator in both directions by realising the controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator. It is insensitive to back pressur...
Dual in line compensated counterbalance valve
Valve used to control the movement and locking of the actuator in both directions by realising the controlled descent of the load that does not escape dragged by its own weight, as the valve does not allow any cavitation of the actuator. It is insensitive to back pressur...
DOUBLE OVERCENTRE VALVES FOR CLOSED CENTRE
These valves are used to control the actuator movements and block it in both directions. In order to have the descent of a load under control and avoid the load’s weight being carried away the valve will prevent any cavitation of the actuator. These valves are ideal when...
